 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR SY10ELT22 SY100ELT22 FEATURES s s s s s s 300ps typical propagation delay <100ps output-to-output skew Differential PECL outputs PNP TTL inputs for minimal loading Flow-through pinouts Available in 8-pin SOIC package DESCRIPTION The SY10/100ELT22 are dual TTL-to-differential PECL translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline 8-lead SOIC package and the low skew, dual gate design of the ELT22 makes it ideal for applications which require the tranlation of a clock and a data signal. The ELT22 is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN CONFIGURATION/BLOCK DIAGRAM PIN NAMES Pin Function Differential PECL Outputs TTL Inputs +5.0V Supply Ground Q0 Q0 Q1 Q1 1 2 PECL 3 4 TTL 8 7 6 5 VCC D0 D1 GND Qn Dn VCC GND SOIC TOP VIEW Rev.: F Amendment: /0 1 Issue Date: January, 1999 Micrel SY10ELT22 SY100ELT22 ABSOLUTE MAXIMUM RATINGS(1) Symbol VCC VI II IOUT Paramter Power Supply Voltage TTL Input Voltage TTL Input Current PECL Output Current -- Continuous -- Surge Storage Temperature Operating Temperature Value -0.5 to +7.0 -0.5 to VCC -30 to +5.0 50 100 -65 to +150 -40 to +85 C C Unit V V mA mA TRUTH TABLE D H L Open Q H L H Q L H L Tstore Tamb NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40C Symbol ICC Parameter Power Supply Current TA = 0C TA = +25C TA = +85C Condition -- Min. Max. Min. Max. Min. Max. Min. Max. Unit -- 30 -- 30 -- 30 -- 30 mA NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: 10ELT22 Series +4.2V to +5.5V. +4.75V to +5.5V. AC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40C Symbol tPLH tPHL tr tf tskpp tskew Parameter Propagation Delay to Output D, ENECL/ENTTL Output Rise/Fall Time 20% to 80% Part-to-Part Skew(2) Within-Device Skew(2,3) TA = 0C TA = +25C TA = +85C Condition 50 to VCC - 2.0V 50 to VCC - 2.0V 50 to VCC - 2.0V 50 to VCC - 2.0V Min. Max. Min. Max. Min. Max. Min. Max. Unit 100 200 -- -- 600 500 500 100 100 200 -- -- 600 500 500 100 100 200 -- -- 600 500 500 100 100 200 -- -- 600 500 500 100 ps ps ps ps NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: 10ELT22 Series +4.2V to +5.5V. +4.75V to +5.5V. 2. Guaranteed, but not tested. 3. Same transition @common VCC levels. 2 Micrel SY10ELT22 SY100ELT22 TTL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40C Symbol VIH VIL IIH IIL VIK Parameter Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Input Clamp Voltage Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.2 -1.2 TA = 0C Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.2 -1.2 TA = +25C Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.2 -1.2 TA = +85C Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.2 -1.2 Unit V V A mA V Condition -- -- VIN = 2.7V VIN = VCC VIN = 0.5V IIN = -18mA NOTE: 1. Parametric values specified at: 5 volt Power Supply Range 100ELT22 Series: 10ELT22 Series +4.2V to +5.5V. +4.75V to +5.5V. PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = VCC (Min.) to VCC (Max.) TA = -40C Symbol VOH Parameter Output HIGH Voltage(2) 10ELT 3920 100ELT 3915 VOL Output LOW Voltage(2) 10ELT 3050 100ELT 3170 -- -- -- -- 4110 4120 3350 3445 3980 3975 3050 3190 -- -- -- -- 4160 4120 3370 3380 4020 3975 3050 3190 -- -- -- -- 4190 4120 3370 3380 4090 3975 3050 3190 -- -- -- -- 4280 4120 mV 3405 3380 Min. Typ. Max. Min. TA = 0C Typ. Max. TA = +25C Min. Typ. Max. TA = +85C Min. Typ. Max. Unit mV NOTES: 1. Parametric values specified at: 100ELT22 Series: 10ELT22 Series 2. These values are for VCC = 5.0V. Level Specifications will vary 1:1 with VCC. 5 volt Power Supply Range +4.2V to +5.5V. +4.75V to +5.5V. PRODUCT ORDERING CODE Ordering Code SY10ELT22ZC SY10ELT22ZCTR SY100ELT22ZC SY100ELT22ZCTR Package Type Z8-1 Z8-1 Z8-1 Z8-1 Operating Range Commercial Commercial Commercial Commercial VCC Range (V) +4.75 to +5.5 +4.75 to +5.5 +4.2 to +5.5 +4.2 to +5.5 3 Micrel SY10ELT22 SY100ELT22 8 LEAD SOIC .150" WIDE (Z8-1) Rev. 03 MICREL-SYNERGY TEL 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 USA FAX + 1 (408) 980-9191 + 1 (408) 914-7878 WEB http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. (c) 2000 Micrel Incorporated 4 |
Price & Availability of SY100ELT22ZC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |